Rubber tire valve supplier & manufacturer
What is rubber tire valve?
Rubber valves find application across a spectrum of uses. These devices, coming in diverse shapes and dimensions, are crafted to regulate, sustain, or regulate the movement of substances through conduits like hoses, pipes, tubing, or comprehensive systems. Typically, valves facilitate the flow in their open state and impede it when shut.
Different models rubber tire valve
Snap-In / 11.5mm / Valve Hole: .453
Over time, the valve stem ages, which can lead to a flat tire. When replacing a tire, a tire technician should replace the valve stem to ensure the tire replacement process goes without problems.
Snap-In / 11.5mm / Valve Hole: .453
When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process.
Snap-In / 11.5mm / Valve Hole: .453
Replace your worn and leaky TR414 tire valves. Featuring a .453″ rim hole, these tubeless tire valves are 1.5″ long and snap in easily to your TR414 tires.
Snap-In / 16.5mm / Valve Hole: .453
These quality valve stems are made with the best EDPM rubber to protect against cracking and wear.
Tire Valve Stem TR418
Snap-In / 11.5mm / Valve Hole: .453
We Start Safe – 100% Leak Tested – TR418 Rubber Valve Stem (5 Pcs/Bag) – Fits 11.5mm/0.453″ Diameter Rim Holes
Tire Valve Stem TR413C
Snap-In / 11.5mm / Valve Hole: .453
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Tire Valve Stem TR413AC
Snap-In / 11.5mm / Valve Hole: .453
We Start Safe – 100% Leak Tested – TR413C Rubber Valve Stem (5 Pcs/Bag) – Fits 11.5mm/0.453″ Diameter Rim Holes
Tire Valve Stem TR414AC
Snap-In / 11.5mm / Valve Hole: .453
Replace your worn and leaky TR414 tire valves. Featuring a .453″ rim hole, these tubeless tire valves are 1.5″ long and snap in easily to your TR414 tires.
4 steps to install the tire valve stem
step 1. Deflate the tire and rim failure.
Step 2. Remove the old tire valve stem.
Step 3. Insert a new tire valve stem from the inside of the rim until it snaps into place.
Step 4. Reinstall the tire and inflate to the recommended pressure.
2 ways to install the valve stem
TYPE 1
1. Insert the valve stem through its hole in the wheel.
3. Use the handle to pull the valve stem.
TYPE 2
1. Release air from the tire with a valve changing tool.
2. Turn the valve changing tool and pull out the valve.
3. Press the valve stem into the tire in a quick motion.