Jump Starter J1201 supplier & manufacturer

Jump Starter J1201
37WH Lithium Battery/1000A Surge/500A Starting Current
- Capacity:3.7V/10000mAh(37Wh)
- Type-C Input:QC18W
- USB Output1:5V/2.1A
- USB Output2:QC18W
- starting current :500A
- Tel:+86-18713779288
- Email:wheelweight9@ssqcpj.com

Technical Data
- Capacity:3.7V/10000mAh(37Wh)
- Type-C Input:QC18W
- USB Output1:5V/2.1A
- USB Output2:QC18W
- starting current :500A
- peak current:1000A
- LED lighting:Light/SOS/Warning
- Applicable to automobile battery voltage :12V
- Less than 5.0L gasoline/3.5L diesel
- Dimension:192.189.239.1mm
- N.W:1.35KGS
Intelligent Protection System
Updated car jumper cables with extended length to reach varied battery terminals, bolder cable for beter conducivity, larger opening range for ease of use. built-in 10 protections and visible alarms to automatically detect connection, willfree allyour worries about incorrect operation and sparks.
LED Light
Long press the power button to turn on/turn off the flashlight. Quick press the power button to switch 3 flashlight modes Lighting / SOS /Strobe Light.
Product LIst
Contact Us
Tel:+86-18713779288 Email:wheelweight9@ssqcpj.com


HOW TO JUMP START YOUR CAR

Switch on your jump starter and make sure battery balance is over 30%.Insert the jump-start clamps into the port correctly and firmly.

Connect thejump-start clamps to the car battery terminals correctly (Red to positive(+),black to negative(-).

Start the engine, once the indicator light on the jumper cable turns green.

Remove the plug from the battery pack and remove the clamps from the car battery.
MANUAL FORCE ACTIVATION START(Car battery drops to 0 voltage)
