Jump Starter J1202 supplier & manufacturer
Jump Starter J1202
59.2WH Lithium Battery / 2000A Surge /1000A Starting Current
- Capacity:3.7V/16000mAh(59.2Wh)
- Type-C Input: QC18W
- USB Output1:5V/2.1A
- USB Output2:QC18W
- Tel:+86-18713779288
- Email:wheelweight9@ssqcpj.com
Technical Data
- Capacity:3.7V/16000mAh(59.2Wh)
- Type-C Input: QC18W
- USB Output1:5V/2.1A
- USB Output2:QC18W
- DC5.5 Output:12V/6A
- starting current :1000A
- peak current:2000A
- LED lighting：Light/SOS/Warning
- Applicable to automobile battery voltage :12V
- Less than 7.0L gasoline/6.5L diesel
- Dimension:1709051.6mm
- N.W:1.34KGS
Intelligent Protection System
Updated car jumper cables with extended length to reach varied battery terminals, bolder cable for beter conducivity, larger opening range for ease of use. built-in 10 protections and visible alarms to automatically detect connection, willfree allyour worries about incorrect operation and sparks.
Product LIst
Contact Us
Tel:+86-18713779288 Email:wheelweight9@ssqcpj.com
Switch on your jump starter and make sure battery balance is over 30%.Insert the jump-start clamps into the port correctly and firmly.
Connect thejump-start clamps to the car battery terminals correctly (Red to positive(+),black to negative(-).
Start the engine, once the indicator light on the jumper cable turns green.
Remove the plug from the battery pack and remove the clamps from the car battery.